Engine technical parameters Engine: KL600 594cc Fuel injection . Engine type: horizontal, single-cylinder, water-cooled, four-stroke, overhead camshaft, four-valve, single balance shaft Bore¡ÁStroke (mm): 96¡Á82 Compression ratio: 10.2:1 Maximum power: 28KW/6500r/min Maximum torque: 55N.m/4500r/min Lowest no-load stable speed (idling speed) 1300 r/min+/-100rpm Minimum fuel consumption rate: 340g/KW.h Spark plug: DPR7EA-9 Ignition method: ignition coil Magneto type: permanent magnet alternator outer rotor flywheel type Oil pump type: rotor type Oil filter type: full-flow filter paper filter element Engine oil grade: SAE15W-40/SF grade Bosch electronically controlled multi-point injection Air filter: Sponge filter element filter type Gasoline: above RQ-92 Transmission: V-shaped toothed belt automatic stepless transmission + stepped transmission with shift cam Shifting method: manual lever shifting Clutch type: wet shoe type automatic centrifugal type Primary gear ratio (infinitely variable transmission): 0.70-2.88 Stepped reduction ratio High gear: 3.514 Low gear: 3.857 Reverse gear: 3.828 Cooling method: closed cooling liquid circulating cooling Coolant type: anti-rust and antifreeze Lubrication method: pressure splash lubrication Dimensions: length x width x height (mm) 610x568x519 Net weight: 70kg Output type: front and rear shaft output Drive direction of the output shaft: both front and rear shafts are clockwise (looking forward from the rear end of the engine) Start mode: electric start KL600 gasoline engine is equipped with a single balance shaft, water cooling, front and rear shaft transmission, automatic centrifugal clutch, automatic stepless and step (including high, low, neutral, reverse) combined transmission mechanism and starting pressure reducing device and other components. Magneto can not only meet the requirements of low speed, high speed, and start ignition, but also can be used for all-terrain vehicle lighting, horn, and external power supply. The maximum speed of the four-wheel drive is 120km/h. (Based on the standard of the prototype) Fuel consumption 5L (based on prototype standard) The engine is a large item, please sign for receipt after inspecting the goods in front of the logistics side. It is not a product quality problem, and returns and exchanges are not accepted. Engine accessories (sold separately): Engine wiring harness (80USD) EFI configuration (sold separately): ECU throttle body assembly, air filter, ignition coil, regulator Any question ,please contact us by EMAIL. info@klung-motor.com Also visit at Klung-motor.com for more details . SKYPE:bill122588 
|
