Engine technical parameters

Engine: KL600 594cc Fuel injection .

Engine type: horizontal, single-cylinder, water-cooled, four-stroke, overhead camshaft, four-valve, single balance shaft

Bore×Stroke (mm): 96×82

Compression ratio: 10.2:1

Maximum power: 28KW/6500r/min

Maximum torque: 55N.m/4500r/min

Lowest no-load stable speed (idling speed) 1300 r/min+/-100rpm

Minimum fuel consumption rate: 340g/KW.h

Spark plug: DPR7EA-9

Ignition method: ignition coil

Magneto type: permanent magnet alternator outer rotor flywheel type

Oil pump type: rotor type

Oil filter type: full-flow filter paper filter element

Engine oil grade: SAE15W-40/SF grade

Bosch electronically controlled multi-point injection

Air filter: Sponge filter element filter type

Gasoline: above RQ-92

Transmission: V-shaped toothed belt automatic stepless transmission + stepped transmission with shift cam

Shifting method: manual lever shifting

Clutch type: wet shoe type automatic centrifugal type

Primary gear ratio (infinitely variable transmission): 0.70-2.88

Stepped reduction ratio

High gear: 3.514 Low gear: 3.857 Reverse gear: 3.828

Cooling method: closed cooling liquid circulating cooling

Coolant type: anti-rust and antifreeze

Lubrication method: pressure splash lubrication

Dimensions: length x width x height (mm) 610x568x519

Net weight: 70kg

Output type: front and rear shaft output

Drive direction of the output shaft: both front and rear shafts are clockwise (looking forward from the rear end of the engine)

Start mode: electric start

 KL600 gasoline engine is equipped with a single balance shaft, water cooling, front and rear shaft transmission, automatic centrifugal clutch, automatic stepless and step (including high, low, neutral, reverse) combined transmission mechanism and starting pressure reducing device and other components. Magneto can not only meet the requirements of low speed, high speed, and start ignition, but also can be used for all-terrain vehicle lighting, horn, and external power supply.

The maximum speed of the four-wheel drive is 120km/h. (Based on the standard of the prototype)

 Fuel consumption 5L (based on prototype standard)

The engine is a large item, please sign for receipt after inspecting the goods in front of the logistics side. It is not a product quality problem, and returns and exchanges are not accepted.

Engine accessories (sold separately): Engine wiring harness (80USD)

 EFI configuration (sold separately): ECU throttle body assembly, air filter, ignition coil, regulator

shipping way : sea shipping only for 15-25 days delivery .

Pament term: 100% TT (telegraphic transfer) in advance .

Any question ,please contact us by EMAIL. info@klung-motor.com

 Also visit at   Klung-motor.com for more details .

 SKYPE:bill122588